Will MagoX Fit Your Phone and Case? A Compatibility Checklist

MagoX compatibility depends on your exact phone, case and attachment surface. A compatible magnetic phone or case may support direct attachment; a suitable non-magnetic setup may need the included adhesive magnetic ring. Neither route means every device or case will work.

This checklist helps you assess physical fit before buying or installing the MagoX Magnetic Ring.

Start with the exact phone and case

Check the full phone model and case name against the current product listing. Cases for the same phone can have different thicknesses, magnetic structures and back surfaces. Do not assume that a phone brand alone establishes compatibility.

Look at the camera area, buttons and charging port. The ring needs a position that does not interfere with holding, viewing or connecting the phone. Assess each case separately if you change cases regularly.

Choose the attachment route

The adhesive ring creates an attachment point on suitable setups. It does not make every surface suitable for mounting. Follow the supplied instructions and check the connection before holding a device with it.

Inspect the installation surface

Confirm the surface is clean, dry, flat and compatible with the adhesive system. Use the preparation method and installation timing recommended for your kit and case. Do not substitute cleaning chemicals or assume another accessory's instructions apply.

Stop if the ring lifts, shifts or does not sit properly. Repeated pressing cannot establish compatibility with an unsuitable surface. Contact MagoX Support with the exact phone, case and intended arrangement if you are unsure.

Check charging separately

Magnetic attachment is a physical connection, not proof of wireless-charging compatibility. MagoX is a grip, stand and attachment accessory; it does not charge the phone. Follow the phone, case, charger and power-bank instructions when choosing a charging arrangement.

For wired charging, make sure the cable reaches the port without pulling on the ring. Check that the power bank's contact area, shape and weight suit the arrangement. Keep ports and normal device controls accessible.

Test close to a stable surface

1. Inspect the ring and attachment point for movement or damage.
2. Align the connection without forcing it.
3. Support the phone while checking that the ring seats properly.
4. Try the intended grip or desk position close to a stable surface.
5. Stop if the setup slips, rocks, lifts or blocks normal use.

This check helps reveal a poor fit but does not make a phone drop-proof. Do not rely on the ring for high-impact or safety-critical mounting.

What comes with MagoX?

The current product listing includes one MagoX Magnetic Ring, one adhesive magnetic ring and two hook-and-loop straps, listed as 20 cm and 10 cm. Phones, power banks and other pictured devices are not included. Check the product page for the current package details before checkout.

Questions to answer before ordering

• What is my exact phone and case model?
• Will I use direct magnetic attachment or the adhesive ring?
• Does the surface suit the installation method?
• Will the ring clear cameras, controls and ports?
• Does the intended grip, stand or accessory arrangement feel stable?

Compatibility FAQ

Can a non-magnetic case work?

A suitable case may work with the included adhesive magnetic ring. Surface, material and placement matter; not every non-magnetic case is suitable.

Does a strong magnetic pull prove the setup works for any activity?

No. Alignment, case construction, device weight and movement affect the connection. Everyday grip and desk use differ from high-impact mounting.

What should I send support?

Share your phone model, case name and intended use. Explain whether you want direct attachment, an adhesive-ring installation or a power-bank arrangement. Read the How to Use guide and FAQ for additional guidance.

Make the decision around your setup

MagoX is worth considering when the full phone-and-case combination supports your intended attachment method. An exact fit check is more useful than a universal compatibility promise.